Newbie
Rear Coilover Question, HELP!
Bought BC Racing coilovers and installed the fronts, started on the rears but am stuck.
Anyone know how make sure the rear spring adjustment and the strut coil adjustment are adjusted the same? Is says to raise or lower them equally but where would I measure from to make sure they are the same? The spring threaded area is a lot shorter than the strut threaded area.
2010 Silverstone Silver 3.8l AT Coupe.
Mods: Varrstoen 18x9.5+12 Fronts / 18x10.5+15 Rears, BC Racing Coilovers, Project Kics NEO CHRO Lug Nuts, 380GT Emblem
Ads by Google
Master Tech
i used to count the rings left....then put the tire one put it down and measure from the ground to the fender (in the middle) then adjust accordingly. I would also bring it to somebody so they can corner balance it. you can eyeball and measure all you want but if the weight is off, it will affect handling.
Certified Hyundai Tech
NO PICS!! = FAIL!
Posting Permissions
LinkBack URL
About LinkBacks
Reply With Quote
