LinkBack URL
About LinkBacks
Lights
Reply With Quote
ok since I haven't heard anything from you guys yet, I found this out:
Headlamps:
non-HID Low Beam = H11b
HID Low Beam = D1S
High Beam = H1
Fog Light = 881
Turn Signal = 2357A (*note: same as 1157 bulb for fitment, just uses .1 amp more power)
Corner Bulb = 194
Tail lamps:
Reverse Light = 921
Turn Signal = 1156
Corner Bulb = 194
Brake Lamps = 1157 (these are the fathest to the outside)
Tail Lamps = 1156 (these are the closest to the trunk)(can use 1157)
License Plate = 194
Interior:
Dome Lights = 194
Glove Box = 194
Trunk Light = 31mm
Vanity = 31mm
Notes of interests:
-Don't know if anyone has changed out their corner bulbs in their taillamps.. but sometimes the 194's will run hot and singe the plastic insert, I recommend changing them to LED to prevent more damage.
-H11b is the same as a H11 but with a slight modification to the tab, a little bit of wiggling and it will fit.
-Lowbeam HID upgrade's will make it so your headlamps won't defrost on their own due to a lack of heat that a normal filliment bulb produces, just clean the frost off with your glove.
-Installing HID's into non-HID specific housings is illegal. The Low-Beam on the GC regardless of OEM HID's or not IS a DOT approved HID housing, however, the High-Beam and Fog/Ditch Lamp are not HID approved and you could be fined.
-When changing to LED bulbs, note that LED's are +- specific and you may need to turn the bulb around to have it work.
Originally Posted by CMcCane
