Thread: spacers

What brand have you been looking at? Eibach and H&R makes spacers from 5mm to 45mm and they are hub centric.

Originally Posted by dreamer

What brand have you been looking at? Eibach and H&R makes spacers from 5mm to 45mm and they are hub centric.

ICHIBA 20mm so far.

I'm not familiar with spacers, is there any issues with using them? I like the idea of making my rims flush with the fender but I was wondering if there were any draw backs?
dreamer, I went to H&R's site but they don't have GC specific spacers, do you know what the GC uses?

somebody on gencoupe was doing a group by for spacers...i forget the company name though.


ANY HYUNDAI spacer for a 5 x 114.3 will fit the inner bore is 67.1 there are generic ones on ebay that bolt right on and are hubcentric.

here is a pic of them installed on my elantra (i have 15mm) then a comparision to my XD2 which bone stock




and a superfulious shot

thanks only1db!

Originally Posted by only1db

somebody on gencoupe was doing a group by for spacers...i forget the company name though.


ANY HYUNDAI spacer for a 5 x 114.3 will fit the inner bore is 67.1 there are generic ones on ebay that bolt right on and are hubcentric.

and a superfulious shot

yes I saw those but they are made with aluminum and copper and have a tendency to rust. But the guy said don't worry you won't see the rust it'll be behind the tire

I wouldn't use anything thats a combo of aluminum and copper, they're dissimilar metals that will corrode eachother.

I don't know if anyone makes a model specific spacer. As long as you have the right bolt pattern, and know what the inner bore is, you should be able to buy any brand and not have any issues. At least...I think so...lol!

I want some flushness too.....flushness = dead sexy. LOL!

here is an example from ebay...these are the same ones (except 15mm) that i have on the car and that the tib guys have been using for years!

its aluminum and magnesium alloy. Very strong and lightweight

ebay spacers