RRM Intake Help

**aznkid625** · 12-07-2009 11:26 AM

i wanna install an rrm intake for my new gencoupe but i only see one hose connecting to the stock intake cuz my car is an automatic. when i saw the rrm intake one, there are 2 of them....could someone help me out? thanks a lot!

**Red Raspberry** · 12-07-2009 11:31 AM

If you don't have the second hose then just cap the nipple on the intake pipe. Seems the later manual turbos are the ones with the second hose.

**aznkid625** · 12-07-2009 11:34 AM

what do u mean cap the nipple? u mean just cover it up with something?

**CMcCane** · 12-07-2009 12:54 PM

I think that Canadian spec 2.0 turbo's have the single tube and certain states in the US have two because of emissions. Shouldn't be a big problem either plug the hose or use a clamp to pinch it off or something.

**Crooked H** · 12-07-2009 01:24 PM

Auto = 1 tube Manual = 2 tubes. I've got one of each

From some debates on other forums it seems the auto has a vacuum pump built in and the manual needs the extra vacuum at idle from the intake.

Just cap the hole on the intake with a rubber stopper or something.

**preston_nfs** · 12-07-2009 02:46 PM

Originally Posted by CMcCane

I think that Canadian spec 2.0 turbo's have the single tube

Originally Posted by Crooked H

Auto = 1 tube Manual = 2 tubes.

^

Correct, I'm in Canada and my M/T 2.0T has the duel tube.

**aznkid625** · 12-07-2009 04:05 PM

okay i will do that. thanks a lot for your help everyone!

one more question: do you think adding this intake would void my warranty?

**preston_nfs** · 12-07-2009 07:38 PM

It's very doubtful. They would have to prove the intake caused a problem.

**Zoile** · 12-08-2009 06:05 AM

Unless your dealer is an a$$ and they would have to prove that it was caused by the intake.

**aznkid625** · 12-08-2009 01:52 PM

alright. that made me make my decision...i shall get it when i hav more money =D

Thread: RRM Intake Help

LinkBack

Thread Tools

RRM Intake Help

Posting Permissions